Fate of pathogens in a simulated bioreduction system for livestock carcasses

The EU Animal By-Products Regulations generated the need for novel methods of storage and disposal of dead livestock. Bioreduction prior to rendering or incineration has been proposed as a practical and potentially cost-effective method; however, its biosecurity characteristics need to be elucidated. To address this, Salmonella enterica (serovars Senftenberg and Poona), Enterococcus faecalis, Campylobacter jejuni, Campylobacter coli and a lux-marked strain of Escherichia coli O157 were inoculated into laboratory-scale bioreduction vessels containing sheep carcass constituents. Numbers of all pathogens and the metabolic activity of E. coli O157 decreased significantly within the liquor waste over time, and only E. faecalis remained detectable after 3months. Only very low numbers of Salmonella spp. and E. faecalis were detected in bioaerosols, and only at initial stages of the trial. These results further indicate that bioreduction represents a suitable method of storing and reducing the volume of livestock carcasses prior to ultimate disposal.     

Accumulation of pollutant nitrogen in calcareous and acidic grasslands: Evidence from N flux and 15N tracer studies

Semi-natural calcareous and acidic grasslands are known to be sensitive to increased atmospheric N deposition. However, the fate of pollutant N within these systems is unknown. This paper reports on the first studies to determine the fate of added N within a calcareous and an acidic grassland subject to long-term simulated enhanced N deposition. Intact soil/turf cores were removed from field plots treated for six years with enhanced N deposition (ambient +0, +35 and +140 kg N ha^?1 year^?1). Cores were inserted into lysimeters and output fluxes of N were monitored in detail. Complete N budgets—calculated from the N flux data—showed considerable accumulation of N within the treated grasslands, up to 76% and 38% of pollutant N in the calcareous and acidic grasslands respectively. In the second study, the short-term (21 day) fate of pollutant N was determined by tracing ¹⁵N labelled ammonium nitrate (+35 kg N ha^?1 year^?1) though the acidic and calcareous lysimeters into plant, soil and leachate pools. Up to 91% and 59% of ¹⁵N was recovered in soils and vegetation of the calcareous and acidic grasslands respectively, with negligible amounts recovered in soil extractable ammonium and nitrate (<0.3%) and in leachate (<0.02%). This rapid short-term immobilisation of pollutant N supports the long-term accumulation of the element calculated from the N flux study.     

Accumulation of pollutant nitrogen in calcareous and acidic grasslands: Evidence from N flux and 15N tracer studies

Semi-natural calcareous and acidic grasslands are known to be sensitive to increased atmospheric N deposition. However, the fate of pollutant N within these systems is unknown. This paper reports on the first studies to determine the fate of added N within a calcareous and an acidic grassland subject to long-term simulated enhanced N deposition. Intact soil/turf cores were removed from field plots treated for six years with enhanced N deposition (ambient +0, +35 and +140 kg N ha^–1 year^–1). Cores were inserted into lysimeters and output fluxes of N were monitored in detail. Complete N budgets—calculated from the N flux data—showed considerable accumulation of N within the treated grasslands, up to 76% and 38% of pollutant N in the calcareous and acidic grasslands respectively. In the second study, the short-term (21 day) fate of pollutant N was determined by tracing ¹⁵N labelled ammonium nitrate (+35 kg N ha^–1 year^–1) though the acidic and calcareous lysimeters into plant, soil and leachate pools. Up to 91% and 59% of ¹⁵N was recovered in soils and vegetation of the calcareous and acidic grasslands respectively, with negligible amounts recovered in soil extractable ammonium and nitrate (<0.3%) and in leachate (<0.02%). This rapid short-term immobilisation of pollutant N supports the long-term accumulation of the element calculated from the N flux study.     

Fluorescent dye imaging of the volume sampled by single well forced-gradient tracer tests evaluated in a laboratory-scale aquifer physical model

This study presents a new method to visualise forced-gradient tracer tests in 2-D using a laboratory-scale aquifer physical model. Experiments were designed to investigate the volume of aquifer sampled in vertical dipole flow tracer tests (DFTT) and push-pull tests (PPT), using a miniature monitoring well and straddle packer arrangement equipped with solute injection and recovery chambers. These tests have previously been used to estimate bulk aquifer hydraulic and transport properties for the evaluation of natural attenuation and other remediation approaches. Experiments were performed in a silica glass bead-filled box, using a fluorescent tracer (fluorescein) to deduce conservative solute transport paths. Digital images of fluorescein transport were captured under ultraviolet light and processed to analyse tracer plume geometry and obtain point-concentration breakthrough histories. Inorganic anion mixtures were also used to obtain conventional tracer breakthrough histories. Concentration data from the conservative tracer breakthrough curves was compared with the digital images and a well characterised numerical model. The results show that the peak tracer breakthrough response in dipole flow tracer tests samples a zone of aquifer close to the well screen, while the sampling volume of push-pull tests is limited by the length of the straddle packers used. The effective sampling volume of these single well forced-gradient tests in isotropic conditions can be estimated with simple equations. The experimental approach offers the opportunity to evaluate under controlled conditions the theoretical basis, design and performance of DFTTs and PPTs in porous media in relation to measured flow and transport properties.     

Identification of tetramethylarsonium in rice grains with elevated arsenic content

Tetramethylarsonium has for the first time been identified in a commercially grown food product, rice, constituting up to 5.8% of the total arsenic in the rice.     

Charcoal production in a UK moorland wildfire – How important is it?

Wildfires are a common feature of peatland environments, but the carbon balance of these wildfires is often not considered and the production of refractory black carbon in these wildfires could be an important addition to carbon accumulation and mitigate losses of biomass during the fire. This study investigates the biomass and carbon losses during a moorland wildfire. Changes in above-ground carbon stocks were calculated using a combination of field data, laboratory measurements and literature values. The results show that approximately 14% of the carbon in the original above-ground biomass remained on the site after the burn. Black carbon production was approximately 6 gC m(-2) which constituted 4.3% of the biomass lost. The survival of biomass and black carbon may help to mitigate the loss of carbon during the fire.     

Modelling of post-fragmentation waste stream processing within UK shredder facilities

With the introduction of producer responsibility legislation within the UK (i.e., waste electrical and electronic equipment directive and end-of-life vehicles directive), specific recycling and recovery targets have been imposed to improve the sustainability of end-of-life products. With the introduction of these targets, and the increased investment in post-fragmentation facilities, automated material separation technologies are playing an integral role within the UK's end-of-life waste management strategy. Post-fragmentation facilities utilise a range of purification technologies that target certain material attributes (e.g., density, magnetism, volume) to isolate materials from the shredded waste stream. High ferrous prices have historically meant that UK facilities have been primarily interested in recovering iron and steel, establishing processing routes that are very effective at removing these material types, but as a consequence are extremely rigid and inflexible. With the proliferation of more exotic materials within end-of-life products, combined with more stringent recycling targets, there is therefore a need to optimise the current waste reclamation processes to better realise effort-to-value returns. This paper provides a background as to the current post-fragmentation processing adopted within the UK, and describes the development of a post-fragmentation modelling approach, capable of simulating the value-added processing that a piece of automated separation equipment can have on a fragmented waste stream. These include the modelling of the inefficiencies of the technology, the effects of material entanglement on separation, determination of typical material sizing and an appreciation for compositional value. The implementation of this approach within a software decision-support system is described, before the limitations, calibration and further validation of the approach are discussed.